Strange Eons, Death May Die

I've been gone a long time. I just might be coming back.

That quench I mentioned

And I had such high hopes. ):

Last night was a disappointment.

The knife I'd been working on for a client... may not be any good.
I was polishing it (the videos I took of this will be uploaded by the way, regardless of the result of the blade,) and once I'd gotten one side up to about 600 grit, I thought I'd give it an etch in some vinegar for a few minutes. I was trying to bring out the hamon line (a video of the unexciting quench will also be put up later,) which DID in fact work. It wasn't particularly pretty, or active, but... it was there. I was happy about that.
But then, as I was sharing photos with some friends... I noticed a problem.

Here you can see the hamon line, in the middle of the blade. It spikes up, settles back down, evens out for a ways, and then spikes again. I'm happy I can see anything at all- a lot of beginners see nothing, even after an etch. Some people can see the hamon after polishing up to only 300 grit.

The hamon is faintly visible here, still. It's not very active, or attractive.

In this image, it's most apparent where the fracture is- approximately 1/3 of the blade length from the tip, there's what looks like (and what I inittially thought was) either a hair, or a steel wool fiber. No such luck, I'm afraid. It's a fracture.

I'm not sure how to handle this. Gut instinct says to scrap the whole blade, but part of me thinks that if I put it through some stress tests and it holds, it'll be fine. Do I really want to go through with that, though? This is my name I'm putting out there. Even if the blade is still balls-sharp, holds the edge well, and is durable... am I really fine with selling a fractured blade? I don't know. I really don't.

I'm just about to fall asleep

So I'm half-assing this post and I'll get to doing my 'rounds tomorrow, alright everyone?
In the mean time, here's a video documenting how I made the jig I'll use for handles. As suggested, I've removed the original audio and implemented a commentary track.






By the way, this was unscripted, so... forgive the stuttering and whatnot.
No, I won't read from a script in the future.

Hooray!

In anticipation for more disappointment...

I'm making an early blog post this morning and simply embedding some music I've been enjoying today.






The internet is home to all sorts of things. Some of it beautiful, some of it terrifying. This is both.

Oh God I am so razy

Well, the Vado HD didn't come last week. It SHOULD BE HERE TODAY. It better be. And hopefully, belts will be arriving, too. Supposing the Vado HD arrives, I will at least use the angle grinder to do some work on the Sgian Dubh for my friend's friend's friend.
Also, I'm in the middle of uploading a video to youtube (althoughf or the life of me I cannot remember what it's of xfd)

Looks the video is me taking the rough cut of the Sgain Dubh to the belt grinder. Also, please note that in this video, you don't actually see the belt snap. That happened a while after I turned off the camera.

God dammit :|

I was grinding out the knife on my belt grinder yesterday, and you know what happens? The only belt I have left snaps while I'm grinding. Thing whipped all over the place and got me pretty good in a few places on my arm. It's a good thing I always wear my safety glasses, or this could've been a lot worse.

Anyway, point it, I'm completely out of belts now. :\
I can't do any work until I get my next order in... which will hopefully be on monday. Hopefully, tonight I'll have some youtube videos up. Which brings me to the next point:

Fuck usin' linkbucks. I made an AMAZING $0.0013 YESTERDAY! Shit's not worth the inconvenience to you guys, so I'm abandoning that. Next youtube videos will be embedded just like they used to be.
By the way? If you've got a very sharp tanto knife blade on the floor... where you sleep, you should probably move it before you go to bed.
I made the mistake of not noticing it there (or simply thinking it would be fine,) and uh. Not so good for me. I remember feeling it while I was dreaming and thinking, "Damn. My dreams are starting to feel more and more realistic, that really fuckin' hurt!"

So, in the mean time I'm doing this other thing.

I've got a friend, who has another friend that's interested in commissioning me for a knife. She wants a Scots Sgian Dubh, with nature themed engraving upon the handle. That last part's gonna be kind of hard- I've never done any carving or engraving.
This morning I drew the rough design for the knife, and traced it on to the steel (I really need to find a better way to do this, by the way.)
Also, I'm doing something a little new. I'm still going to embed pictures, but I'll be linking to my youtube videos from here on out. Sorry for the inconvenience.

I've got videos of almost the whole cutting process. Later tonight or tomorrow I'll get to drinking. Er, grinding. I don't know why I typed drinking. Or why I didn't just delete it.

And now, youtube vidoes!
http://www.youtube.com/watch?v=bYrHzlSzVmM
This depicts the start of my grinding.

And yadda yadda yadda the rest is self explanatory. xd
http://www.youtube.com/watch?v=f8jBBvMPuv8
http://www.youtube.com/watch?v=OUvBSrmhjxU
http://www.youtube.com/watch?v=Z383P52XRsY
http://www.youtube.com/watch?v=b5NR4Zym3ro

Oh God I am a dick

Okay, so... "I'm back in the game!"

CRICKETS FOR A WEEK.

Seriously now, though! I've got the steel the blah blah blah and an idea. I got the cement I needed, and I have an angle grinder (which will allow me to cut the steel oh-so-much faster than before.)
The angle grinder will also allow me to cut the steel closer to the blade shape, meaning less wasted steel, less wear on my belts, and over-all a better work experience. Later on, once I've an anvil, I'll be able to melt down the refuse into ingots and use them for forging.
In fact, this morning I may very well record myself doing some work. I'm juuuust a little hesitant though- my brother bought me a Vado HD to use. So... I don't know, I guess it's up to the five of you that actually read this.
Do I get to work now, using the current video quality and youtube? Or do I wait for the new camera and record in GRIORIOUS 720P?

Back in the game!

A couple days ago I placed an order at Jantz for four 18" long pieces of 1095 Hi-Carbon steel! It's due to arrive thursday afternoon. I'm so happy, and excited! I've also ordered some handle material, epoxy, and pins, as well.
I'll be back to making "knives" quite soon. Thanks for being patient and waiting, everyone!

I know a few of you had expressed interest in a knife from me, and if you're still around, I'd be more than happy to attempt to make something for you. I recall somebody wanted a 10" blade, and someone else hadn't specified what they wanted.
Remember, these knives would be sold to you at a discount. I'd just appreciate the business, and any word of mouth it may generate.
I'd also like to say that if anything happens with anything I make for someone, I'd be more than happy to cover shipping costs for sending it back to me.

Hiatus ):

Sorry there haven't been any updates in a few days.
I'm all out of steel, and I don't really have an scrap around I can use either. I won't be able to even make any orders for more until Wednesday, and I'm not entirely sure how long it will take for the shipment to get here.
However, the next shipment should have two or more bars of steel to work with, as well as some stainless steel for fittings and pins.
Heh, I just remembered I'm running out of sanding belts, too. They can get worn out pretty quickly- it doesn't take all that long for an 80 grit to become as effective as 120 grit, then 300, and eventually it'll either just fall apart, or basically polish the steel.
Until I can get back to work, I'll be on a hiatus. Once I get materials again, I'll be sure to let you all know. In the mean time, I'll still be reading your blogs, and I may leave comments.

Getting a GRIP on things

Yup, it's a terrible pun and I make no apologies.
Last night my dad picked me up some more materials for finishing up Jim's knife. I'm really lucky to have a dad who's so supportive of this hobby/hopeful-profession. He's basically paid for all of my tools. Paid for the forge ($120+,) materials ($60+,) Belt Grinder ($120~,)bench vise ($30~,) and a bunch of other items.
So any way, he picked up two clamps and some epoxy, so I was able to put the wood scales on Jim's knife. I recorded the whole thing, and gave some narration, too. I'm nervous, so my voice is shaky and I have an awful speaking voice. Although, I'd still like to mention that the camera makes me sound a lot more nasal and lispy than I really am :x

Forging *withOUT an anvil.

Not a good idea, let me tell you. I was trying to get by using a 20lb dumbell. Shit. Don't. Work. Like, at all. There's a reason people suggest 150lb anvils, and it's not just because they're better quality. Having that weight there to ensure your surface doesn't jump under the hammer is a Godsend.

Earlier today I tried hammering the steel. I was hoping I could give it a bit of a downward tilt, to later grind it into a kukri or something like that. Well, it didn't work out. Like, at all. There's a reason they hammer it as a square bar first, and then shape it. All I managed to do was bend the steel a little bit the way I wanted, and too much in ways I didn't. I tried to straighten it out and salvage it, but... I don't know how well that's working.
Once I'd figured it wasn't getting any straighter, I decided I might as well start to grinding on it and make something of it anyway. Here's what I'd come up with so far:

Tomorrow or tonight I'll be able to quench it. I need more propane- I'm not sure the tank I have right now has enough left in it. But after that, she's ready for a handle and all that.

Later tonight I should also get about 4 videos up, showing some of the progress of the knife. What would be really cool is if I had something I could do a timelapse with. I don't have a camera capable of that, unfortunately.


Edit: Videos are up!

These videos will do more damage than good

Yeah, it's uh... you know, my first knife. Go easy on it.
Also, it's a somewhat unusual style of grind, and it's actually ground for lefties- and I'm a righty. That affects some of the performance.
I don't actually have a lisp, by the way. It's something with the camera. D;
Also I look fat






Still looking fat, still sounding lispy.
I ran out of memory in the first

Wellp

Just got an email from Google AdSense. They canned my account.
D;

Edit: This doesn't mean I'm going to stop blogging, though. The money was always just a bonus for me. Hopefully all of you still drop by now and then to take a look at how things are going, and those that do can count on my continued support.

Thank you David Davidson, BeKindPlease and Mantooth!

The former for the great idea of a demonstration video! Unfortunately, it's raining outside right now- not hard, but hard enough to make using a digital camera outside impossible. If it clears up, expect a video of some serious wood manhandling! I don't know exactly what's a good idea for 'stress' tests, but I'll come up with something.

BeKindPlease for even considering showing me any sort of patronage. I only hope that if you do choose to do so, I can meet your expectations for what a knife should be.

And Mantooth for being an all around great guy, who's been inquisitive and supportive!

Everyone else, thank you for taking the time to visit, to comment, and to make this the best blogging experience!

Hard at work on my first client's knife!

lol @ calling them a client.

Anyway, it's 9:49am here in Wisconsin, and I haven't been to sleep yet. I've finished grinding out the knife blank, and I've just sent a text to Jim asking if he'd like the edge beveled on both sides, as is done on a traditional knife, or on a single side like I did with mine. Once I have a response, I'll start grinding away at the blade.
In the mean time, I'm going to bevel the handle to reduce some of the weight- see if I can't get the balanced a little better.

Videos of the grind!

Nobody answered, so here's your choice of youtube or megaupload. Enjoy!

http://www.youtube.com/watch?v=kdECccejQaU
http://www.youtube.com/watch?v=NnUVqHTKMvM
http://www.youtube.com/watch?v=QHHmNHwUvtM

http://www.megaupload.com/?d=M42GP7UC
http://www.megaupload.com/?d=DLA0NIKF
http://www.megaupload.com/?d=Y0FHKW2C

My brother-in-law (the one that gave me the great wood- his name's Jim) came by earlier today and took a look at the knife. He really liked it- was quite impressed. He wants me to make another almost just like, but with a half-inch longer blade. Told me he'd pay me $20 and that he'd recommend me to his friends! That's pretty sweet deal imo. Couldn't ask for more than that.

First finished knife!

It's done! Huzzah!

I proceeded to apply epoxy to one side of one of the scales, and the knife tang. I applied pressure, and lined them both up. After waiting for approximately 30 seconds, I set it down and let it cure. It's a quick setting 5 minute epoxy. After 10 minutes I did the same with the other scale. After 20 minutes, it was ready to grind to its final shape:

Yes, I know I have girly hands :x
I'll upload a video or three later tonight showing some of the handle shaping. Just let me know, woudl you all prefer I upload them to youtube, or megaupload? They're much smaller in file size now (10-23mb instead of 100-230mb)